Payloads
The TASE LT Gimbal
was designed for a small vehicle nose mount configuration that fits within a 4.5 inch tube envelope to meet the NAVAIR SBIR Phase II requirement. The TASE LT design will allow for mounting on a variety of different vehicle configurations using a standard form factor payload.
- Fits within a 114 mm (4.5 inch) tube
- Supports camera range of EO and IR imagers
- Nose mount or belly mount pan over tilt configuration
Mechanical |
|
 Size: |
121 x 97.1 x 89.9 mm (4.8 x 3.8 x 3.5 inches) |
| Payload Volume: |
10in 3 |
| Weight: |
455 grams (1.0 lb with EO camera) |
Environmental |
|
| Operating Temperature: -20°C to +80°C (excluding camera) |
|
Gimbal Performance
|
|
Interface |
|
| Control Interface: |
RS232 and CAN |
| Video Out: |
NTSC analog (PAL available on select cameras only) |
Electrical |
|
| Supply Voltage: |
10 - 30 Volts |
| Power: |
10 W (typical) 18 W (max) |
Download the TASE LT Data Sheet for specifications and dimensional drawings of the TASE LT Gimbal.
Custom camera integration available, contact us for options. Download the Gimbal Camera Comparison.
| TASE LT Configuration Options | |||
| TASE LT Cameras | Image Resolution | Lens | HFOV |
| Sony FCB-IX11A EO | NTSC 380K Pixels | 10x Optical | 46°-5° |
| Sony FCB H11 (HD) | 2M Pixels | 12x -10x | 50º - 5.4º |
| IR Cameras | |||
| FLIR / Indigo Photon 320 | 324 x 256 | 19mm | 36.0° |
| 35mm | 20.0° | ||
| Thermoteknix 110K | 384 x 288 | 14.25mm | 50.5° |
| 32mm | 23.7° | ||
| SWIR Cameras | |||
| Goodrich SU 320 KTX | 320 x 240 | 16mm | 30.5° |
| 25mm | 19.6° | ||
The Gimbal Developer's Kit
provides first time Gimbal users all the parts needed for setting up the gimbal in a lab environment for bench-top testing and facilitating vehicle integration. A single license of the Gimbal UI Ground Based Control Software is included in the Gimbal Developer’s Kit. See the Gimbal UI page for more information.- CCT Part No. 500-00250-00
- CCT Part No. 500-00257-00
- CCT Part No. 500-00260-00
- CCT Part No. 500-00303-00
- CCT Part No. 500-01202-00
- CCT Part No. 500-01203-00
- CCT Part No. 500-01206-00
- CCT Part No. 500-01332-00
- CCT Part No.500-01468-00
- CCT Part No.500-02119-00
- CCT Part No. 500-02009-00
- CCT Part No. 500-02118-00
- CCT Part No. 620-00562-00
- CCT Part No. 900-01208-00
TASE LT Developers Kit
CCT Part Number 900-02117-00
- Gimbal Integration Guide - Provides technical assistance for installing the TASE gimbal into an airframe.
- Gimbal Communications - Describes the communications protocol used to talk to the TASE gimbal.
- Gimbal Image Meta Data Format - Defines data format of TASE gimbal metadata that is included with image file recorded by the Gimbal UI application.
- Gimbal UI-Interface Spec - Defines interface protocol for Gimbal UI application to support 3rd party applications that wish to extract data from or interface through that application.
- Gimbal User Interface Roadmap 2008 - Provides a general idea of upcoming features that have been included and are going to be included in the baseline implementation of the Gimbal UI.
- TASE 3AX Integration Guide – Includes vehicle integration guidelines and a step-by-step guide to install the gimbal into the 3AX.
- TASE 3AX Communications Specification – Defines the communications for the TASE 3AX Gimbal deployment mechanism.
- Complete Product List - A complete list of integration, peripherals, and accessory items designed to optimize CCT products and systems.
- TASE Gimbal Harness Schematics - Included with the TASE Gimbal Developer’s Kit. Provides power and serial interfaces needed for laboratory setups.
- TASE Gimbal Volume Drawings - 3D volume models of the TASE gimbal available in various formats.
- TASE Gimbal Mounting Drawings - Mounting and hole locations for the TASE gimbal.
- TASE Gimbal Payload Volume Drawings - Payload volume models of the TASE gimbal available in various formats.
- TASE Duo Volume Drawings – 3D volume models of the TASE Duo gimbal available in various formats.
- T2 Volume Drawings - 3D volume models of the T2 gimbal available in various formats.
- T2 Payload Volume Drawings – Payload volume models of the T2 gimbal available in various formats.
- TASE LT Volume Drawing – 3D volume models of the TASE LT.
- 3AX Gimbal Sweep Drawings – 3D models of the TASE Duo in a 3AX that provide the sweep clearance needed by the gimbal for aircraft integration.
- Latest Gimbal Release - Includes all Gimbal software applications, tools, installers and related support documentation.
- Gimbal User Interface - Includes the installers, plug-ins, documentation, release notes, and drivers for the Gimbal UI.
- TASE Gimbal Family – Comparison of specifications for the TASE family of Gimbals.
- TASE LT Data Sheet - Specifications, camera Options, and dimensional drawings for the TASE LT.
- TASE Gimbal Data Sheet - Specifications, camera Options, and dimensional drawings for the TASE gimbal.
- TASE Duo Data Sheet - Specifications, camera Options, and dimensional drawings for the TASE Duo.
- T2 Gimbal Data Sheet - Specifications, camera Options, and dimensional drawings for the T2 gimbal.
- VPS Data Sheet - Specifications and dimensional drawings of the Video Processing System.
- TASE 3AX Deployment Mechanism Data Sheet - Specifications and dimensional drawings for the TASE 3AX deployment mechanism.
TASE LT Flight Test
Join our list
if you would like to be notified of the latest product updates - software update notices, critical faults, software bugs and procedure updates.
You can also visit our Downloads page to get the latest software updates, product documentation, drawings, videos and other useful CCT tools and information.
View the product update history
© Cloud Cap Technology, a Goodrich Company. All rights reserved.
Directions to our office, map and local accommodations.
Web: Gorge Web Design Site Map Privacy
